Quick View
A damaged screw shouldn’t bring your project to a halt. See how Grabit® performs, explore the extractor range and choose the right tool for your repair.
Watch the full comparison on YouTube · Published May 4, 2020
Project Farm compared Grabit® Pro with competing extractors on damaged screws and bolts. Pro led the stripped-screw test and successfully prepared and removed another screw in a follow-up demonstration.
See the stripped-screw results at 8:06 →
Different extractors led the separate larger-bolt test. Project Farm did not test Grabit® Micro or Drill-Out in this comparison.
After testing five kits, BobVila.com selected the Alden Grabit® Pro four-piece kit as its top overall choice. The review highlights its consistent grip and convenient reversible design.
The same article recommends the Alden Grabit® Micro four-piece kit for smaller fasteners. Micro was a researched selection, outside the five hands-on tests.
Read the review and testing details at BobVila.com →
By Tony Carrick · Updated September 18, 2024 · The publisher discloses affiliate links.
Small fasteners need an appropriately sized tool. Go Build Stuff offers a short look at Micro in use. For a specialist repair example, see TLC Guitares’ guitar saddle set-screw demonstration.
Watch the guitar repair demonstration →
These are individual demonstrations, rather than head-to-head comparisons. Check the manufacturer’s sizing and instructions for your repair.
Start with the fastener, its size and the damage. Each product page includes a removal chart to help you choose.
For damaged screws and broken bolts within Pro’s size range. A double-ended tool combines preparation and extraction.
View Grabit® Pro kit
For smaller damaged fasteners that need a smaller extractor. Check the removal chart for your particular screw or bolt.
View Grabit® Micro kitFor broken-bolt repairs. A drill and adjustable extractor collar work together, with a different setup from Pro and Micro.
View Grabit® Drill-Out kitNeed help choosing? Ask us about your repair.
Grabit® Pro, Micro and Drill-Out are manufactured in the USA.
All three extractor lines use M2 high-speed steel, tempered twice for hardness.

Lifetime coverage for defects in materials and workmanship, subject to the manufacturer’s terms. Read the warranty.
No. The comparison featured Grabit® Pro. Micro’s editorial recognition and demonstrations are identified separately above. The test does not establish a competitive ranking for Drill-Out.
No. Fastener size, material, damage, corrosion, access and technique all influence extraction. Use the removal chart and instructions for your chosen tool.
Start with our product-specific how-to guides. If you are unsure which kit fits your repair, contact The Grabit Store before ordering.